User guide

86
Managing the Access Point
Enabling Other Management Access Options
2. Review the access options listed in Table 2 7, and then make changes as needed.
3. If you want to use TR-069 or SNMP to manage the AP, configure the settings listed
in Tab l e 28
.
Table 27. Management Access Options
Option Description
Telnet access By default, this option is disabled (inactive).
Telnet port This field lists the default Telnet port of 23 — only if Telnet
is active. You can manually change this port number, if
required.
SSH access By default, this option is enabled (active).
SSH port This field lists the default SSH port of 22—only if SSH is
active. You can manually change this port number if
required.
HTTP access This option is disabled by default.
HTTP port This field lists the default HTTP port of 80, if HTTP has been
activated. You can manually change this port number if
required.
HTTPS access By default this option is enabled. This connection mode
requires a security certificate, a copy of which has been pre-
installed in the device.
HTTPS port This field lists the default HTTPS port of 443—only if HTTPS
has been activated. You can manually change this port
number if required.
Certification
Verification
This notes whether the security certificate linked to the
HTTPS settings has been passed or not.
Table 28. TR-069 and SNMP Management Options
Option Description
Auto Enables the ZoneFlex device to connect to either
SNMP server, Ruckus Wireless ZoneDirector, or
Ruckus Wireless FlexMaster.
SNMP only Only allow SNMP management
FlexMaster only Only allow FlexMaster management
DHCP Discovery URL of server providing DHCP
FlexMaster Server URL URL of the FlexMaster server