User guide

73
Configuring the Access Point
Controlling Access to the Wireless Network
4. Select the radio button for the desired access control. (For a description of the
options, see“Access Control Options”
on page 73.) The Access Controls Table
appears.
5. Click Add new entry to add a MAC address to the table.
6. Type the MAC address in the spaces provided.
7. Click Update to save your changes. Assuming all parameters you entered are
acceptable, that row will be added to the table.
You have completed adding an entry to the MAC address table. If you have additional
MAC addresses you want included, click Add new entry, and then repeat these steps
until you have entered all the stations you want. There is a limit of 128 rows.
Figure 37. Access control settings
Removing MAC Addresses from the List
Simply check the box under the Remove column for the MAC address entry you want
to remove from the table, and then click Update. The page refreshes and the MAC
address that you removed disappears from the list.
Access Control Options
This section describes the options that you can use to control access to the wireless
network.