User guide

59
Configuring the Access Point
Configuring Common Wireless Settings
NOTE: If ZoneDirector exists on the network, you can enable AeroScout RFID tag
detection on all its managed APs at once. Refer to the ZoneDirector online help for
more information.
4. Click Update Settings to save your settings.
Figure 29. The Configuration > Wireless page
Reviewing the Advanced > Common Options
This page permits access to advanced wireless functions. These settings should only
be changed by an experienced administrator. Incorrect settings can severely impact
wireless performance. It is recommended that the default settings be retained for best
performance.
CAUTION: To fully benefit from the AP’s capabilities, it is advisable not to change
these settings unless absolutely necessary.
To configure the advanced common options
1. On the Configuration > Wireless page, click Edit Common Settings. The
Configuration :: Wireless :: Advanced :: Common page appears.