User guide

Configuring the Access Point

Configuring the Device Settings

To enable PoE for the PoE OUT port

1. On the menu, click Configuration > Device.

2. In Power Source, select the Use custom PoE injector check box.

3. Click Update Settings to save your changes.

You have completed enabling PoE for the PoE OUT port.

Figure 27. Select the Use custom PoE injector check box

In addition to the supplied Ruckus Wireless PoE injector for the ZoneFlex 7762 AP,

you can also use DC power or a standard 802.3af/802.3at PoE injector to supply power

to the AP. Note, however, that some features (specifically, the built-in heater and PoE

for the PoE OUT port) will be unavailable if the supplied PoE injector is not used. Refer

to Tabl e 19

for the available power options and the limitations associated with each

option.

Table 19. Power configuration options

Power Input Operational AP Heater PoE for PoE OUT

12V DC Yes No No

802.3af input Yes No No

802.3at input Yes Yes No

Ruckus Wireless PoE

injector for ZoneFlex 7762

AP (with supplied power

adapter)

Yes Yes Yes