User guide

Installing the Access Point

Step 1: Preconfigure the Access Point

http://192.168.20.1/intune/server

https://192.168.20.1/intune/server

5. Click Update Settings to save your changes.

You have completed setting the FlexMaster server address on the Access Point.

Figure 23. Type the FlexMaster server URL

NOTE: Instructions on how to verify that the Access Point and FlexMaster can

communicate with each other are provided in “Check the TR069 Status (FlexMaster

Management Only)” on page 43.

5. Disconnect the Access Point from the Administrative

Computer

1. Disconnect the Access Point from the power source.

2. Verify that the power LED on the Access Point is off.

3. Disconnect the Ethernet cable from the administrative computer’s Ethernet port.