User guide

Introducing the ZoneFlex Access Point

Getting to Know the Access Point Features

2 DIR LED • Off: The Access Point is not being managed by

ZoneDirector (standalone mode).

• Green: The Access Point is being managed by

ZoneDirector.

• Slow flashing green (one flash every two seconds):

The Access Point is being managed by

ZoneDirector, but is currently unable to

communicate with ZoneDirector.

• Fast flashing green (two flashes every second):

The Access Point is being managed by

ZoneDirector and is currently receiving

configuration settings (provisioning) or a firmware

update.

3 2.4G LED (WLAN) • Off: The WLAN service is down.

• Amber: The WLAN service is up, at least one

wireless client is associated (standalone), or at

least one downlink MAP is connected (RAP), or

uplink RAP is connected (MAP), but signal quality

is poor (RSSI < 15).

• Green: The WLAN service is up, at least one client

is associated (standalone), or at least one

downlink MAP is connected (RAP), or uplink RAP

is connected (MAP), and signal quality is good

(RSSI >= 15).

• Flashing green: The WLAN service is up, no clients

are associated (standalone), no downlink MAPs

are connected (RAP), or no uplink RAP is

connected (MAP).

4 5G LED (WLAN) •Off: The WLAN service is down.

• Green: The WLAN service is up and at least one

wireless client is associated.

• Fast flashing green (two flashes every second):

The WLAN service is up and no wireless clients are

associated.

• Slow flashing green: zMesh AP searching for an

uplink, or searching for ZoneDirector.

Table 6. ZoneFlex 7962 side panel elements

Number LED/Button Name Description