User guide

Configuring Wireless Settings
Configuring Wireless # Settings
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 99
Figure 41. Access control settings
5 To add a MAC address to the Access Control table, click the Add new entry
button.
6 Fill out the Address text boxes: Six text boxes appear in which you enter the
desired MAC address, in hexadecimal digit form, two characters in each box.
Allowable hex-digit characters are 0-9, a-f, and A-F.
7 Click Update to save your changes. Assuming all parameters you entered are
acceptable, that row is added to the table. You have completed adding an entry
to the MAC address table.
8 If you have additional MAC addresses you want included, then click Add new
entry, and then repeat these steps until you have entered all the stations you
want. There is a limit of 128 rows.
Removing a MAC Address
To remove a MAC address from the ACL table, click the Cancel button in the
Remove column, and then click Update. The ACL table refreshes, and the MAC
address that you deleted disappears from the table.