User guide

Configuring Wireless Settings
Configuring Wireless # Settings
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 98
• Disable WLAN access restrictions: The MAC-address-based restrictions on
which stations can join the WLAN are disabled, so any station can join. If the
WLAN uses encryption, then the station must still supply the correct encryption
passphrase. When this option is selected, the Access Controls table is hidden.
• Allow only stations listed in the Access Control Table: Only stations entered
into the access-controls table are allowed, but all others are disallowed. To add
MAC addresses, see “Changing Access Controls for a WLAN” on page 98.
• Deny only stations listed in the Access Control Table: Stations entered into
the access-controls table are disallowed but all others are allowed. To add MAC
addresses, see “Changing Access Controls for a WLAN” on page 98.
Changing Access Controls for a WLAN
By default, the Disable WLAN access restrictions option is selected, which allows
any wireless station to gain access to the wireless network. If you want to change
this setting, follow the instructions below.
1 Go to Configuration > Wireless/Radio 2.4G/Radio 5G.
2 Click the Wireless # tab for which you want to configure the access control
settings.
3 Click the Edit Settings button next to Access Control.
4 Select the radio button for the desired access control. (For a description of the
options, refer to “Access Control List (ACL) Options”.) The Access Controls Table
appears.