User guide

Configuring Wireless Settings
Configuring Wireless # Settings
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 89
NOTE Using WEP encryption limits the performance of this WLAN to 802.11g
rates, and other WLANs are unaffected. If you select WEP encryption for a WLAN,
wireless devices that are capable of faster 802.11n transfer rates are limited to
802.11g rates.
1 Go to Configuration > Wireless/Radio 2.4G/Radio 5G. The Configuration >
Wireless > Common page appears.
2 Click the Wireless # tab that you want to configure. The Configuration > Wireless
> Wireless[#] page appears.
Figure 36. WEP settings
3 In the Encryption Method menu, select WEP. An additional set of WEP-specific
encryption options appear.
4 Review the encryption settings listed in Tab le 2 7 , and then make changes as
required.
Table 27. WEP Options
Encryption Setting Description
Authentication Mode
Open is the only authentication mode available with WEP
encryption.