User guide

Configuring Wireless Settings
Configuring Common Wireless Settings
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 84
Figure 34. The Configuration > Wireless > Advanced > Common page
2 Configure the advanced settings listed in Ta b l e 2 5 as required.
Table 25. Advanced wireless common settings
Option Description
Transmit Power The default setting is
Full. Select the level of transmit power from the
drop-down menu. This option sets the maximum transmit power level
relative to the predefined power (this value differs according to the
current country code).
5.8 GHz
Channels
(Only available in certain countries selected using the
Country Code
option.) Select Enable to activate the optional 5.8GHz channels
(disabled by default).