User guide

Configuring Local Subnets
Configuring L2TP Connection Settings
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 79
5 In DHCP Server, click Enabled if you want to enable DHCP for this subnet.
Starting Address and Maximum DHCP Users fields appear.
6 In Starting Address, enter an address in the same subnet as the Local IP Address
(for example,
192.168.40.2).
7 In Maximum DHCP Users, enter the maximum number of clients that can be
assigned addresses by DHCP in this subnet (valid values are 1-253 if the default
subnet mask is used).
8 In Access VLAN, enter a VLAN ID to segment client traffic arriving from this subnet
from other network traffic. (Example: If you use the default 192.168.40.1
address range, you would generally use “40” as the VLAN for this subnet.)
9 Click Update Settings to save your changes. The local subnet is created
immediately and can now be applied to WLANs or Ethernet ports from their
respective configuration pages.