User guide

Getting to Know the Access Point Features
ZoneFlex 7782-S Access Point
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 48
ZoneFlex 7782-S Access Point
NOTE ZoneFlex 7782-S requires a minimum of ZoneFlex (ZF) firmware version
9.5.1 and later to operate.
Figure 19 identifies the connectors and LEDs on the 7782-S 120-Degree Sector
AP. Tab l e 16 describes the LEDs and connectors.
Figure 19. Connectors and LEDs on 7782-S AP - bottom view
Table 16. 7782-S AP LED and connector descriptions
Label Description
PoE IN RJ45
data connector
Supports 10/100/1000Mbps connections, connects to the network
and receives 802.at Power over Ethernet (PoE) from the Ruckus
Wireless 60W PoE injector.
PoE IN
PoE OUT
AC IN
Earth Ground
Screw
STATUS LED
POWER LED
Reset Button
(inside case)