User guide

Upgrading the Firmware
Upgrading Manually via the Web
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 130
CAUTION! Do not change any of the Image Control File, Username or Password
entries.
3 Click Perform Upgrade. A status bar appears during the upgrade process.
4 After the upgrade is completed, you must manually reboot the AP.
Upgrading Manually via the Web
1 In the Upgrade Method options, click Web.
2 If instructed to choose a different URL than the default value, type the URL of
the download Web site in Url. Remember to start the URL with
http://.
3 Click Perform Upgrade. A status bar appears during the upgrade process.
4 After the upgrade is completed, you must manually reboot the AP.
Upgrading Manually via Local File
If you have already saved a firmware file on your local computer, you can upgrade
directly using the Web interface.
1 In the Upgrade Method, select Local.
2 Click Choose File and locate the file on your local computer.
3 Select the file and click Open.
4 Click Perform Upgrade. A status bar appears during the upgrade process.
5 After the upgrade is completed, you must manually reboot the AP.
Scheduling Automatic Upgrades
1 In the Upgrade Method options, click the button for your preferred choice.
2 Enter the appropriate information in the Host name or IP address field.
CAUTION! Do not change any of the Image Control File, Username or Password
entries.
3 Verify that the Auto Upgrade option is set to Enabled.
4 Tog g l e th e Interval to Check for Software Upgrade drop-down list to select your
preferred interval.