User guide

Installing the Access Point
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 12
Installing the Access Point
This User Guide assumes that the ZoneFlex Outdoor APs have already been
installed and have already been initially configured as described in the corresponding
Installation Guide or Getting Started Guide.
NOTE DO NOT connect the Access Point to your live network when first
connecting the AP to an administrative computer. If you connect it to a live network
with an active DHCP server, then the AP will acquire a new IP address from DHCP
and you will be unable to access it via the default IP address (192.168.0.1).
If the AP has a new IP address, then reset the AP to the factory configuration as
described in the corresponding installation guide.
Because of different mounting and wiring procedures, each outdoor AP model has
its own installation guide. Refer to the installation guide that shipped with your
product for model-specific installation instructions. These documents are available
from
support.ruckuswireless.com
.