User guide

Configuring Hotspot Service
Customizing Hotspot Optional Settings
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B 109
Acct Delay Time Accounting delay Enabled or Disabled. This attribute
indicates how many seconds the client has been trying
to send this record for, and can be subtracted from the
time of arrival on the server to find the approximate time
of the event generating this Accounting-Request. When
enabled, this attribute appears in accounting request
packets with a starting value of “0”, incremented each
retry packet. When disabled, this attribute is not included
in any accounting request packet.
NAS ID Specify the Network Access Server identifier of this
device. The NAS-ID attribute is sent in RADIUS access
and accounting request messages. It can also be used
as location identification when NAS-IP-Address cannot
be used for this purpose.
WISPr Location ID Specify the Hotspot location identifier. This value is
provided in the RADIUS access and accounting
requests. It is recommended that the value is in the form
of “
isocc=<ISO_Country_Code>,
cc=<E.164_Country_Code>,ac=<E.164_Are
a_Code>,network=<SSID/ZONE>”
.
WISPr Location Name Specify the hotspot location and operator's name. This
value is provided in the RADIUS access and accounting
requests. It is recommended that the value is in the form
of
“
<HOTSPOT_OPERATOR_NAME>,<Location>”.
Location Description Specify the description of location. This value is provided
in the HTTP redirection.
Accounting Update Interval Specify the interval for RADIUS accounting requests.
Interim Redirect Interval Specify the interval after which users are redirected to
the login URL.
Maximum Session Time Enter the maximum session time in minutes.
Grace Period Specify the maximum time that a user may disconnect
from the Hotspot service and return without the need to
login again.
Table 35. Optional Hotspot settings (Continued)