Installation guide

About this Installation Guide

Using this Installation Guide

NOTE: The AP can be managed using an AP web browser interface, an AP command line

interface (CLI), a simple network management protocol (SNMP) interface, and Ruckus

Wireless ZoneDirector

and FlexMaster

. This document contains configuring instruc-

tions using these interfaces, as appropriate.

Table 1. Adding a 7782 AP to an Existing Ruckus Wireless network

Section Heading

2 Planning the 7782 Access Point Installation

• 7782 AP Versions

• AP Connectors and LEDs

• Positioning the GPS Antenna

• Performing a Site Survey

• Planning the Physical Installation

• Deciding How to Power the AP

3 Preparing the 7782 Access Point at the Depot and Shipping to the

Field

• Unpacking the AP

• Powering the AP

• Configuring the AP for Management by ZoneDirector

• Configuring the AP for Management by FlexMaster or for

Standalone Operation

• Verifying AP Operation

• Shipping the AP to the Field

4 Installing the 7782 Access Point in the Field

• Installation Components and Constraints

• Deploying the AP

• Mounting the AP

• Mounting External Antennas (7782-E only)

• Verifying AP Operation

5 What to Do Next

• Changing the Administrative Password

• Configuring the Security Settings

• Configuring Advanced Settings and Features

• Reading Related Documentation