Installation guide

66
Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts
0.625-inch 0.250-28
machine screws with
split lock and flat
washers
(4 sets)
-- Mounting Kit Stainless
steel
12mm M4x0.8 phillips
pan-head screws with
split lock and flat
washers
(4 sets)
-- Mounting Kit Stainless
steel
RJ-45 waterproof cable
gland
(2 pieces)
902-0183-
0000
Mounting Kit
AC cable connector
(1 piece)
902-0185-
0000
Mounting Kit
1m lugged earth
ground wire
741-65006-
001
Mounting Kit
Safety cable
(1 piece)
740-64242-
001
Mounting Kit
GPS Antenna with
cable and mounting kit
(powered by 3.3VDC,
requires 150mA or less)
902-0114-
0000
AP Kit Only if
7782-E GPS
is used
Ruckus Wireless 60W
PoE injector (optional)
902-0180-
XX00,
where XX is
the country
code
Optionally
customer-
ordered
Only if PoE is
used
Country-specific 3-wire
AC power cable with an
IEC C13 plug on the
PoE injector end
-- Optionally
customer-
ordered
Only if AC is
used
Table 10. Ruckus Wireless- and customer-supplied parts
Part Ruckus
Wireless
P/N
Mounting Kit,
AP Kit, or
Customer
Ordered
Notes