Installation guide

61
Installing the 7782 Access Point in the Field
Verifying Access Point Operation
There are three ways you can configure the gain for the 2.4GHz antennas:
■ Configuring the 2.4GHz Antenna Gain from the AP Web Interface
■ Configuring the 2.4GHz Antenna Gain from the 7782-E CLI
■ Configuring the 2.4GHz Antenna Gain from the ZoneDirector Web Interface
Configuring the 2.4GHz Antenna Gain from the AP Web Interface
1. If not already done, log in to the 7782-E AP Web interface as described in “Logging
In to the Access Point’s Web Interface” on page 22.
2. On the left menu of the Web interface, click Configuration > Radio 2.4G. The
Common page appears.
Figure 35. Configure the external 2.4GHz antenna gain - AP web interface
3. In the External Antenna Gain text box, enter the antenna gain value (in dBi) in the box
provided.
4. If you made any changes to the Common tab, click Update Settings.
You have configured the 2.4GHz antenna gain. Continue with “
Associating a Wireless
Client with the AP” on page 63.