Installation guide

59
Installing the 7782 Access Point in the Field
Verifying Access Point Operation
Figure 33. Configure the external 5GHz antenna gain - AP web interface
3. In the External Antenna Gain text box, enter the antenna gain value (in dBi) in the box
provided.
4. If you made any changes to the Common tab, click Update Settings.
You have configured the 5GHz antenna gain. If you are also configuring the 2.4GHz antenna
gain, then continue with “Configuring 2.4GHz External Antenna Gain” on page 60. If you
are not configuring the 2.4GHz antenna gain, then continue with “
Associating a Wireless
Client with the AP” on page 63.
Configuring the 5GHz Antenna Gain from the 7782-E CLI
1. Log in to the 7782-E AP command line interface.
2. Set the 5GHz antenna gain by entering the following command:
set extantgain wifi1 <0 - 90dBi>
3. Verify that the antenna gain has been configured by entering the following command:
get extantgain wifi1