Installation guide

50
Installing the 7782 Access Point in the Field
Mounting External Antennas (7782-E Only)
NOTE: If you are connecting two 2.4GHz antennas to the AP, then use the ANT 0 and
ANT 2 2.4GHz connectors. If you are connecting three 2.4GHz antennas to the AP, then
use the all three 2.4GHz connectors.
If you are connecting two 5GHz antennas to the AP, then use the ANT 0 and ANT 2 5GHz
connectors. If you are connecting three 5GHz antennas to the AP, then use the all three
5GHz connectors.
6. Apply weatherproofing tape to the antenna connectors to help prevent water and dirt
from entering the AP.
CAUTION: If you are not connecting external antennas to the AP, then make sure that the
metal caps remain installed and securely fastened to protect the interfaces from elements,
such as water and dirt.
You have completed connecting external antennas to the 7782-E AP. Continue with
Mounting and Connecting an External GPS Antenna
.