Installation guide

44
Installing the 7782 Access Point in the Field
Mounting the Access Point
Figure 26. Dome-down mounting
5. Adjust the tilt of the AP as required.
NOTE: If the GPS feature is to be used on this AP, then make sure that the GPS antenna
is mounted outdoors and pointed up or toward a mostly-unobstructed view of the sky as
described in “
Positioning the GPS Antenna” on page 9.
6. Using a 13mm wrench, tighten the M8 hex bolt until the AP mounting bracket is securely
fastened to the hanger bracket.
You have completed mounting the AP. Continue with Earth Grounding the AP.