Installation guide

Installing the 7782 Access Point in the Field

Mounting the Access Point

Attaching the AP and Mounting Bracket Assembly to the

Hanger Mount

There are two ways to attach the 7782 AP and AP mounting bracket assembly to the

mounting bracket, depending on the antenna directivity that you want to use.

NOTE: The 7782-E AP can be mounted in any orientation, as long as the external GPS

antenna can be mounted outdoors and pointed up or toward a mostly-unobstructed view

of the sky.

■ Sector Mounting -- This type of mounting uses the AP mounting bracket only.

■ Dome-Down Mounting -- This type of mounting uses the AP mounting bracket with

the extension bracket.

Sector Mounting

1. Place the AP mounting bracket attached to the AP on top of the hanger mount so that

the indexed teeth and screw holes on both are aligned (Figure 23

Figure 23. Sector mounting

NOTE: Hanger mount shown attached

horizontally to allow AP azimuth

adjustments. Attach the hanger mount

vertically to allow AP elevation

adjustments.