Installation guide

32
Preparing the 7782 Access Point at the Depot and Shipping to the Field
Shipping the AP to the Field
4. Restore the computer’s network settings by typing the original IP address settings in
the TCP/IP Properties dialog box.
5. In the TCP/IP Properties dialog box, click OK to close it.
6. Click OK again to close the Local Area Connection Properties dialog box.
You are now ready to ship the AP. Continue with Shipping the AP to the Field
.
Shipping the AP to the Field
After you have prepared the AP as described earlier in this section, repackage the AP and
its mounting kit in the original shipping container and ship it to its final installation site.
Continue with “Installing the 7782 Access Point in the Field” on page 33.