Installation guide

27
Preparing the 7782 Access Point at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation
If you are configuring the AP for management by FlexMaster, then continue with
“
(Optional) Setting the FlexMaster Server Address” on page 27. If you are configuring the
AP for standalone operation, then continue with “
Disconnecting the AP from the Admin-
istrative Computer” on page 31.
(Optional) Setting the FlexMaster Server Address
When you have a FlexMaster server installed on the network and you intend to use
FlexMaster to manage the AP, you can set the FlexMaster server address at this point.
Before starting this procedure, make sure you obtain the correct FlexMaster server URL.
NOTE: In addition to setting the FlexMaster server URL manually on the AP, you can also
use DHCP Option 43 or DNS to point the AP to the FlexMaster server. For more
information, refer to the FlexMaster User Guide.
1. On the menu, click Administration > Management.
2. Scroll down the page to the TR069 / SNMP Management Choice section (Figure 16
).
Figure 16. Type the FlexMaster server URL