Installation guide

24
Preparing the 7782 Access Point at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation
Configuring Common Wireless Settings
The settings on the Common tab are required to enable wireless devices to associate with
the AP. The default wireless settings on the AP are listed in Table 4
.
NOTE: ZoneFlex 7782 has one 2.4GHz radio and one 5GHz radio. The wireless settings
for each radio need to be configured separately on the Web interface. To configure the
2.4GHz radio settings, click Configuration > Radio 2.4G. To configure the 5GHz radio
settings, click Configuration > Radio 5G.
1. On the left menu of the Web interface, click Configuration > Radio {2.4G/5G}. The
Common page appears (Figure 14
).
Figure 14. The Configuration > Radio 2.4 > Common tab
Table 4. Default wireless settings
Setting Default Value
SSID (network name) Wireless 1 to Wireless 8 (8 WLANs)
Encryption (security) Disabled on all WLANs
Default management IP address 192.168.0.1