Installation guide

Preparing the 7782 Access Point at the Depot and Shipping to the Field

Unpacking the AP

Package Contents

A complete AP package contains all of the items listed below:

• ZoneFlex 7782 Outdoor Access Point

• One AC power cable input end connector

• Two M 25 data cable glands

• One green/yellow earth ground wire with ring terminal

• One 12mm M6x1 earth ground screw with split lock and flat washers

• One loop-and-eye safety cable

• Service Level Agreement/Limited Warranty Statement

• Regulatory Statement

•This Installation Guide

• One Mounting Kit (refer to “

Mounting Kit Contents” for details)

Mounting Kit Contents

NOTE: “Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts” on

page 65 includes pictures and descriptions of these and other factory-orderable and

customer-supplied parts.

The mounting kit includes the following:

• One wall- or pole-mount hanger mount

• One extension bracket

• One AP mounting bracket

• Two sets 40mm M8x1.25 hex bolt with split lock and flat washers

• Two SAE32 steel clamps, 2.5-inch diameter

• Four sets 0.250-28 x 0.625-inch hex bolt with split lock and flat washers

• Four sets 12mm M4x0.8 phillips pan-head screws with split lock and flat washers