Installation guide

15
Preparing the 7782 Access Point at the Depot and Shipping to the Field
Unpacking the AP
3 Preparing the 7782 Access Point at the
Depot and Shipping to the Field
■ Unpacking the AP
■ AP Connectors and LEDs
■ Powering the AP
■ Configuring the AP for Management by ZoneDirector
■ Configuring the AP for Management by FlexMaster or for Standalone Operation
■ Verifying AP Operation
■ Shipping the AP to the Field
Unpacking the AP
1. Open the ZoneFlex AP package, and then carefully remove the contents.
2. Return all packing materials to the shipping box, and put the box away in a dry location.
3. Verify the 7782 Version:
• Part number 901-7782-xx01 = 7782 Omni
• Part number 901-7782-xx51 = 7782-S 120-Degree Sector
• Part number 901-7782-xx61 = 7782-N 30-Degree Narrow Sector
• Part number 901-7782-xx81 = 7782-E External Antenna
4. Verify that all items listed in “
Package Contents” and “Mounting Kit Contents” are
included in the package. Check each item for damage. If any item is damaged or
missing, notify your authorized Ruckus Wireless sales representative.
NOTE: “Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts” on
page 65 includes pictures and descriptions of these and other factory-orderable and
customer-supplied parts.