User guide

87
Managing the Access Point
Enabling Other Management Access Options
3. If you want to use TR-069 or SNMP to manage the AP, configure the settings listed
in Tab l e 25
.
4. Click Update Settings to save your changes. A confirmation message appears at
the top of the page.
You have completed configuring the management access options.
NOTE: Remember to open any relevant firewall ports between the AP and the
firmware upgrade/management server. For example, if HTTPS is used for firmware
upgrades, open TCP port 443 on the firewall to allow connections through port 443.
If FlexMaster server is used, open TCP ports 80 and 443 for HTTP/HTTPS communi-
cations, and TCP port 8082 for AP wake-up commands.
Table 25. TR-069 and SNMP Management Options
Option Description
Auto Enables ZoneFlex AP management by SNMP server,
Ruckus Wireless ZoneDirector or Ruckus Wireless
FlexMaster
SNMP only Only allow SNMP management
FlexMaster only Only allow FlexMaster management
None Disables ZoneFlex AP management by SNMP server,
ZoneDirector and FlexMaster
DHCP Discovery URL of server providing DHCP
FlexMaster Server URL URL of the FlexMaster server
Digest-authentication
Username/Digest-
authentication Password
This information is automatically generated by the AP
and used for authentication with FlexMaster. Change
this value only
if you want the AP to connect to another
access control server (ACS).
Periodic FlexMaster Inform
Interval
Interval at which the AP should attempt to contact
FlexMaster