User guide

86
Managing the Access Point
Enabling Other Management Access Options
To enable other management access options
1. Go to Administration > Management. The Management page appears.
2. Review the access options listed in Table 24
, and then make changes as needed.
Table 24. Management Access Options
Option Description
Telnet Access By default, this option is disabled (inactive).
Telnet Port This field lists the default Telnet port of 23 — only if Telnet is
active. You can manually change this port number, if required.
SSH Access By default, this option is enabled (active).
SSH Port This field lists the default SSH port of 22—only if SSH is active.
You can manually change this port number if required.
HTTP Access This option is disabled by default.
HTTP Port This field lists the default HTTP port of 80, if HTTP has been
activated. You can manually change this port number if
required.
HTTPS Access By default this option is enabled. This connection mode
requires a security certificate, a copy of which has been pre-
installed in the AP.
HTTPS Port This field lists the default HTTPS port of 443—only if HTTPS
has been activated. You can manually change this port number
if required.
Certification
Verification
This notes whether the security certificate linked to the HTTPS
settings has been passed or not.
Auto-provisioning This setting is disabled by default, and should only be enabled
if using FlexMaster server for AP management.