User guide

51
Configuring the Access Point
Configuring Wireless Settings
Configuring Wireless # Settings
The Access Point provides up to eight wireless LANs per radio that can be individually
configured to provide different kinds of services for different kinds of wireless clients,
traffic types or different user groups. Each WLAN can be configured with separate
security settings, VLANs, access controls and rate limiting policies, among other
settings.
Figure 25. Wireless # settings
To configure wireless # settings
1. Go to Configuration > Wireless. The Configuration > Wireless > Common page
appears.
NOTE: If you are using a dual band ZoneFlex AP, go to Configuration > Radio 2.4G
or Configuration > Radio 5G.
2. Click one of the eight Wireless (#) tabs. The Configuration > Wireless > Wireless
[#] page appears.
3. Review the WLAN options listed in Table 15
, and then make changes as required.
Table 15. WLAN options
Option Description
Wireless
Network
This wireless network name is for management purposes only, and
is not visible to the user.