User guide

40
Configuring the Access Point
Configuring Internet Settings
Figure 20. Renew or Release DHCP
To renew or release the DHCP server-assigned IP address
1. Go to Status > Internet.
2. Review the current settings.
3. If the current Connection Type is DHCP, you will be able to see the currently-
assigned IP address and subnet mask listed below.
• To force the AP to release its DHCP-assigned IP address, click Release DHCP.
This will disconnect the user from Web interface as the system reverts to its
default IP address. Log in to the AP using the default IP address (192.168.0.1)
and click on Renew DHCP to request a new lease from the DHCP server.
• Click Renew DHCP to request a new IP address lease from the DHCP server.
Note: The IP address may or may not change depending on the lease time
offered to this AP.
4. Click Update Settings to save your settings.