User guide

29
Connecting an Administrative Computer to a Standalone AP
6. Click OK to save your changes and close the TCP/IP Properties dialog box.
7. Click OK again to close the Local Area Connection Properties dialog box.
Windows saves the IP address settings that you have configured. Continue with
Connecting the Administrative Computer to the Access Point
.
Connecting the Administrative Computer to the Access
Point
1. If you are powering the AP with PoE, then continue with Step 2. If you are powering
the AP with AC, then continue with Step 5
.
2. Connect one end of the Ethernet cable to the Data In port on the PoE injector.
3. Connect the other end of the Ethernet cable to the administrative computer either
directly or through a hub.
4. You have completed connecting the administrative computer to the AP. Continue
with Chapter 3
.
5. Connect one end of the Ethernet cable to the PoE IN port on the AP.
6. Connect the other end of the Ethernet cable to the administrative computer.
7. You have completed connecting the administrative computer to the AP. Continue
with Chapter 3
.