User guide

98
Managing the Access Point
Running Diagnostics
Running Diagnostics
Two network connection diagnostic tools – ping and traceroute – have been built into
the AP to help you check network connections from the Web interface.
To run diagnostics for network troubleshooting
1. Go to Administrator > Diagnostics. The Administrator > Diagnostics page
appears. Two options are available:
• Ping
•Traceroute
2. Click the text field by the option you want to activate, and type the network
address of a site you wish to connect to.
3. Click Run test.
The results appear in the text field below each option.
Figure 48. Pinging a client