User guide

2
Unpacking the ZoneFlex Access Point
Package Contents
2 Unpacking the ZoneFlex Access Point
1. Open the Access Point package, and then carefully remove the contents.
2. Return all packing materials to the shipping box, and put the box away in a dry location.
3. Verify that all items listed in Package Contents
below are included in the package.
Check each item for damage. If any item is damaged or missing, notify your authorized
Ruckus Wireless sales representative.
Package Contents
A complete Access Point package contains all of the items listed below:
■ ZoneFlex 7762 Outdoor Access Point
■ Small plastic bag containing the Ruckus Wireless PoE injector for ZoneFlex 7762 AP
■ Box containing the power adapter for the PoE injector
■ Box containing the mounting kit (see “Mounting Kit Contents” for details)
■ Small plastic bag containing the DC connector pins and DC cord connector assembly
(see Figure 1
)
■ Two small plastic bags each containing RJ-45 waterproofing assembly (see Figure 2)
■ Small plastic bag containing an electrical shunt (for resetting the Access Point to factory
default settings, see Figure 3
)
■ Ground screw
■ Service Level Agreement / Limited Warranty Statement
■ Regulatory Statement
■ This Getting Started Guide
WARNING: The Ruckus Wireless PoE injector and power adapter (if supplied with your
Access Point) are for indoor use only. Never mount the PoE injector and power adapter
outdoor with the Access Point.