User guide
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Access Point
- 3 Before You Begin
- 4 Configuring the Access Point
- Configuring for Management by ZoneDirector
- Configuring for Standalone Operation or for Management by FlexMaster
- What You Will Need
- Step 1: Prepare the Administrative Computer
- Step 2: Connect the Access Point to the Administrative Computer
- Step 3: Log Into the Access Point’s Web Interface
- Step 4: Configure the Wireless Settings
- Step 5: Disconnect the Access Point from the Administrative Computer
- Step 6: Restore the Administrative Computer’s Network Settings
- 5 Verifying Access Point Operation
- 6 Deploying the Access Point
- 7 Attaching the Mounting Brackets
- 8 Mounting the Access Point
- 9 (Optional) Mounting and Connecting the 5GHz External Antennas
- 10 Resetting the Access Point to Factory Default Settings
- 11 What to Do Next
31
Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
Figure 25. Type the FlexMaster server URL
NOTE: Instructions on how to verify that the Access Point and FlexMaster can communi-
cate with each other are provided in “Check the TR069 Status (FlexMaster Management
Only)” on page 34.
(Optional) Enable PoE for the PoE OUT Port
If you are using the supplied Ruckus Wireless PoE injector for 7762 AP (and power adapter)
to supply power to the AP, you can use PoE OUT port to supply PoE to any PoE-capable
device (for example, another ZoneFlex 7762 AP or an IP-based surveillance camera). The
PoE feature for the PoE OUT port needs to be enabled from the Web interface.
NOTE: If you use DC power or a PoE injector other than the one supplied with the AP,
the AP will be operational but some features (such as the built-in heater and PoE for the
PoE OUT port) will be unavailable. See Table 5 below for more information.
To enable PoE for the PoE OUT port
1. On the menu, click Configuration > Device.
2. In Power Source, select the Use custom PoE injector check box.
3. Click Update Settings to save your changes.
You have completed enabling PoE for the PoE OUT port.