User guide

61
Managing the Multimedia Wi-Fi Wall Switch
Upgrading the Firmware
Figure 34. The Auto Upgrade section on the Upgrade page
To configure automatic upgrades
1. In the Upgrade Method options, click the button for your preferred upgrade
method.
NOTE: Automatic Upgrade is only available if you select TFTP, FTP, or Web as the
Upgrade Method.
2. In Firmware Server or URL (depending in whether selected TFTP/FTP or Web as
the upgrade method), type the host name, IP address, or URL where the Multi-
media Wi-Fi Wall Switch can automatically download the firmware.
CAUTION: Do not change any of the Image Control File, Username, or Password
entries.
3. In Auto Upgrade, verify that the Enabled option is selected (active).
4. In Interval to Check for Software Upgrade, select the time interval when you
want the Multimedia Wi-Fi Wall Switch to automatically check for firmware
upgrades. Options range from 1 hour to 4 weeks.