User guide

60
Managing the Multimedia Wi-Fi Wall Switch
Upgrading the Firmware
2. Click the host name field, and then type the URL of the server. Or click the IP
address field, and then type the IP address of the server.
CAUTION: Do not change any of the Image Control File, Username, or Password
entries.
3. Click Perform Upgrade. A status bar appears during the upgrade process.
4. After the upgrade is completed, you must manually reboot the Multimedia Wi-Fi
Wall Switch.
Upgrading Manually via the Web
1. In the Upgrade Method options, click Web.
2. Click the Web Options URL field, and then type the URL of the download Web
site. Remember to start the URL with the http:// prefix.
3. You can change the Image Control File filename extension as noted here:
• Replace any file names ending in .rcks with the .html extension
• Replace any file names ending in .fI7 with the .html extension
CAUTION: Do not change the Username or Password entries.
4. Click Perform Upgrade. A status bar appears during the upgrade process.
5. After the upgrade is completed, you must manually reboot the Multimedia Wi-Fi
Wall Switch.
Upgrading Manually via Local File
If you have already saved a firmware file on your local computer, you can upgrade
directly using the Web interface.
1. In the Upgrade Method options, choose Local.
2. Click the Browse button and locate the file on your local computer.
3. Select the file and click OK.
4. Click Perform Upgrade. A status bar appears during the upgrade process.
5. After the upgrade is completed, you must manually reboot the AP.
Scheduling Automatic Upgrades
Configure the automatic upgrade schedule to enable the Multimedia Wi-Fi Wall
Switch to check a firmware upgrade source for available downloads and upgrade its
firmware automatically.