User guide

57
Managing the Multimedia Wi-Fi Wall Switch
Enabling Logging and Sending Event Logs to a Syslog Server
Enabling Logging and Sending Event Logs to
a Syslog Server
If you have a syslog server on the network, you can configure the Multimedia Wi-Fi
Wall Switch to send the device logs to the server. You will need to enable logging,
and then configure the ZF7025 to send logs to the syslog server.
1. Go to Administration > Log. The Administration :: Log page appears.
2. Look for Log Status, and then click Enabled.
3. After enabling logging, configure the following options:
• Syslog Server Address [Optional]: To enable the Multimedia Wi-Fi Wall
Switch to send messages to a syslog server as they appear, enter the IP address
of the syslog server.
• Syslog Server Port: By default, the syslog port number is 514. If the syslog
server is using a different port, enter that port number in this field.
4. Click Update Settings to save and apply your changes.
Figure 32. The Administration > Log page