User guide

53
Managing the Multimedia Wi-Fi Wall Switch
Changing the Administrative Login Settings
If you want to make changes to any of these settings, go to the Configuration >
Wireless page. Refer to “
Configuring Common Wireless Settings” on page 31 for
more information.
Changing the Administrative Login Settings
The default user name is super and the default password is sp-admin. To prevent
unauthorized users from logging in to the Web interface using these default admin-
istrator login settings, Ruckus Wireless recommends that you change the default Web
interface password immediately after your first login.
To change the default administrator login settings
1. Log into the Web interface.
2. Go to Configuration > Device. The Device page appears.
Table 19. Common Wireless settings
Setting Description
Wireless Mode Shows the wireless mode that the Multimedia Wi-
Fi Wall Switch is currently using. Possible values
include:
• 11n/g
Channel Shows the wireless channel that the Multimedia
Wi-Fi Wall Switch is currently using. If you set the
wireless channel to SmartSelect, this field will
show the value Channel # [SmartSelect].
Channel Width Shows the current channel width (20MHz or
40MHz).
Country Code Shows the country code that the Multimedia Wi-
Fi Wall Switch has been set to use.
CAUTION: Verify that the Multimedia Wi-Fi Wall
Switch is using the correct country code to make
sure it uses only the allowed radio channels in your
region. Selecting the incorrect country code may
result in violation of application laws.
AeroScout RFID tag detection Shows Enabled if you enabled AeroScout RFID
tag detection. The default setting is Disabled.
AeroScout Engine
communication daemon
Shows Up if the communication agent on the AP
is able to relay location data from AeroScout Tags
to the AeroScout Engine. If the communication
agent is unable to relay data or AeroScout tag
detection is disabled, this field will show Down.