User guide

49
Configuring the Multimedia Wi-Fi Wall Switch
Configuring LAN Ports
Figure 28. The Configuration :: LAN Ports page
To configure LAN ports
1. Go to Configuration > LAN Ports.
2. Review the following table and make changes as needed for each of the ports
labeled LAN 1 through LAN 4, which correspond to the labels on the outside of
the AP.
3. Click Update Settings to save your changes.
Table 18. Configure the LAN ports
Setting Description
Enable All LAN ports are enabled by default. Unchecking
this box next to a port disables that LAN port
entirely. If you do not want to provide wired access
through the AP, uncheck (clear) the Enable box
next to each LAN port.
No VLAN Selecting No VLAN disables VLAN tagging on
the access port.
VLAN ID Selecting VLAN ID and entering a VLAN ID
number in the field segments all traffic arriving
into this LAN port into the VLAN specified. Valid
entries are 2-4094.