User guide

47
Configuring the Multimedia Wi-Fi Wall Switch
Controlling Access to the Wireless Network
■ Denying Only Stations Listed in the Access Controls Table: If you select Deny
only stations listed in the Access Controls Table, then stations entered into the
access-controls table are disallowed but all others are allowed. To add MAC
addresses, see “
Changing the Access Controls for a WLAN” on page 47.
Changing the Access Controls for a WLAN
By default, the Disable WLAN access restrictions option is selected, which allows
any wireless station to gain access to the wireless network. If you want to change this
setting, follow the instructions below.
Figure 27. Access control settings
To edit the ACL
1. Go to Configuration > Wireless.
2. Click the Wireless # tab for which you want to configure the access control
settings.
3. Click the Edit Settings button next to Access Control.
4. Select the radio button for the desired access control. (For a description of the
options, see “
Access Control Options” in the previous section.) The Access
Controls Table appears.
5. To add a MAC address to the Access Control table, click the Add new entry
button.
6. Fill out the following text boxes: