User guide

37
Configuring the Multimedia Wi-Fi Wall Switch
Configuring Wireless Settings
4. When you are finished, click Update Settings to save and apply the changes. A
confirmation message appears at the top of this page.
5. Click Go back to Wireless Configuration to reopen the previous page.
SSID This is the publicly-broadcast “name” of your wireless
network. SSIDs can contain up to 32 alphanumeric
characters and are case-sensitive.
Dynamic VLAN This allows the RADIUS server to indicate the virtual LAN
assignment of a wireless client during the 802.1X
authentication process.
Threshold Settings This button opens a page where you can configure the
Protection Mode you activated on the Configuration ::
Wireless :: Advanced :: Wireless [#] page. If Protection
Mode is not active, ignore this option.
For more information, see “Setting Threshold Options”
on page 43.
Rate Limiting This button opens a page where you can configure upload
and download limits per station. For more information,
see “
Rate Limiting” on page 45.
Access Control This button opens a page where you can configure access
controls for the WLAN. For more information, see
“
Controlling Access to the Wireless Network” on page 46.
VLAN Enable this option and enter a VLAN ID if you want to tag
all traffic from this WLAN to a specific VLAN.
Encryption Method By default, all data exchanges on your wireless network
are not encrypted, but you can pick an encryption method
in this option, and use the extra workspace features that
appear to fine-tune the encryption settings.
Ruckus Wireless strongly recommends using WPA
encryption, as WEP has been proven to be easily
circumvented.
For more information, see either “
Using WEP” on page 38
or “Using WPA” on page 40.
Table 14. Wireless [#] options