User guide

33
Configuring the Multimedia Wi-Fi Wall Switch
Configuring Wireless Settings
3. If you are using AeroScout Tags in your organization to locate assets or personnel,
you can use your ZoneFlex AP to relay location or presence data from the
AeroScout Tags to the AeroScout Engine via Wi-Fi.
To enable the AP to relay AeroScout data, click the Enable option in AeroScout-
RFID tag detection.
To check the status of the AeroScout communication agent (which relays location
data from AeroScout Tags to the AeroScout Engine), go to the Status > Wireless
page. Refer to “Viewing Current Wireless Settings”
on page 52 for more informa-
tion.
NOTE: For other AeroScout-related configuration, refer to the AeroScout documen-
tation that was shipped with your AeroScout Tag and AeroScout Engine.
NOTE: If ZoneDirector exists on the network, you can enable AeroScout RFID tag
detection on all its managed APs at once. Refer to the ZoneDirector online help for
more information.
4. Click Update Settings to save your settings.
Reviewing Common Advanced Settings
Advanced wireless settings should only be changed by an experienced administrator.
Incorrect settings can severely impact wireless performance. It is recommended that
the default settings be retained for best performance.
CAUTION: To fully benefit from the Multimedia Wi-Fi Wall Switch’s capabilities, it is
advisable not to change these values unless absolutely necessary.