User guide

Configuring the Multimedia Wi-Fi Wall Switch

Configuring Internet Settings

To renew or release the DHCP server-assigned IP address

1. Go to Status > Internet.

2. Review the current settings.

3. If the current Connection Type is DHCP, you will be able to see the currently-

assigned IP address and subnet mask listed below.

• To force the DHCP server to assign a new IP address to the Multimedia Wi-Fi

Wall Switch, click Renew DHCP. If the AP is listed in the DHCP server’s address

table, it will attempt to reassign the previous address to the AP (unless the

address is already in use).

• To force the DHCP server to assign a new IP addresses to all networked devices

at the same time (including this Access Point), click Release DHCP. This will

cause a temporary interruption in overall network service.

4. Click Update Settings to save your settings.