User guide

Configuring the Multimedia Wi-Fi Wall Switch

Configuring Device Settings

Device settings refer to the device name and service provider login settings.

Figure 16. The Configuration :: Device page

To configure the device settings

1. Go to Configuration > Device. The Configuration :: Device page appears.

2. In Device Name, type a new name for the device or leave as is to accept the default

device name (RuckusAP). The device name identifies the Multimedia Wi-Fi Wall

Switch among other devices on the network.

3. Under Service Provider Login, change the login information as required:

• Username: Type the name that you want to use for logging into the Web

interface. The default user name is super.

• Password: Type the new password that you want to use. The password must

consist of six to 32 alphanumeric characters only.

• Password confirmation: Retype the new password to confirm.

4. Click Update Settings to save and apply your changes.