User guide

Navigating the Web Interface

Logging Into the Web Interface

If you need to manage the device, you do it with the features of the Ruckus Wireless

Web interface (which you already used to set up the device for use).

NOTE: The following procedure assumes that you know the IP address that the

device is currently using, or you have some means of determining the dynamic IP

address in use by the device. The computer that you will use to access the Web

interface must be on the same subnet as the Ruckus Wireless device.

To log into the Web interface

1. On your computer, open a Web browser window.

2. In the address or location bar, type the IP address of the device. Be sure to enter

it in the format:

http://<ip_address>

3. Press <Enter> to connect to the Web interface.

4. If a Windows security alert dialog box appears, click OK/Yes to proceed. The

Ruckus Wireless Admin login page appears.

5. In Username, type super.

6. In Password, type sp-admin.

7. Click Login.

The Multimedia Wi-Fi Wall Switch Web interface appears.

Figure 14. Login page of the Web interface