User guide

16
Installing the Multimedia Wi-Fi Wall Switch
Installing the ZF7025
2. Verify that the common wireless settings are configured as listed in Ta ble 10.
3. If you made any changes to the Common tab, click Update Settings.
4. Continue to Configure Wireless # Settings
below.
Figure 10. The Configuration :: Wireless :: Common tab
Table 10. Common wireless configuration
Setting Recommended Value
Wireless Mode 2.4GHz (802.11b/g/n) (not configurable).
Channel SmartSelect
Channel Width 20MHz
Country Code • If you purchased the Access Point in the United
States, this value is fixed to United States at the
factory and is not user configurable.
• If you purchased the Access Point outside the
United States, verify that the value is set to your
country or region. Selecting the correct country
code ensures that the Access Point uses only
the radio channels allowed in your country or
region.
AeroScout RFID tag
Detection
Disabled