User guide

14
Installing the Multimedia Wi-Fi Wall Switch
Installing the ZF7025
3. Take one of the CAT5 Ethernet cables. Connect one end of the Ethernet cable to
the Ethernet port on your computer, and then connect the other end to the 10/
100 DATA IN port on the PoE injector.
4. Take the other Ethernet cable. Connect one end to the PoE OUT port on the PoE
injector, and then connect the other end to the PoE In LAN 5/Uplink port on the
rear of the device (see Figure 8
).
Figure 8. Rear panel of ZF7025
Step 3: Log In to the Device
1. On your computer, open a Web browser window.
2. In the address or location bar, enter 192.168.0.1.
3. When the login screen appears, type super as the user name and sp-admin as
the password.
PoE In
LAN 5/Uplink