User guide

3
Introducing the 7025 Multimedia Wi-Fi Wall Switch
Unpacking the ZoneFlex 7025
Unpacking the ZoneFlex 7025
1. Open the ZoneFlex 7025 package, and then carefully remove the contents.
2. Return all packing materials to the shipping box, and put the box away in a dry
location.
3. Verify that all items listed in Package Contents
below are included in the package.
Check each item for damage. If any item is damaged or missing, notify your
authorized Ruckus Wireless sales representative.
Package Contents
The contents of your ZoneFlex 7025 package includes the following:
■ ZoneFlex 7025 unit
■ Mounting bracket with two (2) mounting screws
■ ZoneFlex 7025 Quick Start Guide
■ Software License Agreement/Warranty Statement
■ Regulatory flyer
■ Registration card
Getting to Know the ZoneFlex 7025 Features
This section identifies the physical features of each Multimedia Wi-Fi Wall Switch
model that is discussed in this guide. Before you begin the installation process, Ruckus
Wireless recommends that you become familiar with these features.
■ ZF7025-US Model
■ ZF7025-EU Model
ZF7025-US Model
This section describes the physical features of the ZF7025-US model, which is
designed to fit in a standard US-style wall electrical outlet box. The outlet box must
conform to NEMA-WD6, with a minimum depth of 1.4 inches.
Front View Features
The front view of ZF7025-US, shown in Figure 1, features a LAN port door which covers
the four LAN ports, a pass through port and a DC in socket on the right side. Refer to
Table 3
for more information.