User guide

52
(Optional) Mounting and Connecting the External Antenna
Step 2: Attach the Dynamic Bracket to the Access Point
Figure 37. Connect the standard N-type male connector to the standard N-type
female connector on the Access Point
4. Apply weatherproofing tape to the antenna connector to help prevent water from
entering the connector.
5. Reconnect the Access Point to the power source.
CAUTION: If you are not connecting an external antenna to the standard N-type antenna
interface on the Access Point, make sure that the metal cap remains installed and securely
fastened to protect the interface from elements, such as water or dirt.
You have completed connecting the external antenna to the Access Point.